As an avid ATV enthusiast, I have spent many weekends exploring off-road trails and challenging myself on rugged terrain. One of the most important aspects of enjoying my ATVs is being able to transport them safely and efficiently.
I have had a lot of experience loading and hauling ATVs on trailers, and in this article, I will share my personal experience and tips for loading 2 ATVs onto a 6×12 trailer.
This article explains everything you need to know about loading 2 ATVs on a 6×12 trailer, whether is it possible, the weight requirements for loading, and much more.
Can You Put 2 ATVs On 6×12 Trailer?
You can put 2 ATVs on a 6 x 12 trailer by loading them nose to tail. A 6 x 10-foot trailer can also be used, but the ATVs will need to be loaded side by side. A 6 x 12 trailer is a better option for carrying 2 ATVs.
You may want to check out this article on Will a Golf Cart Fit on A 5×8 Trailer if you own a golf cart.
What is The Best 6×12 ATV Trailer To Carry 2 ATVs?
The 2022 Sure-Trac 6 x 12 Tube Top ATV Trailer 3K Idler features a heavy-duty spring-loaded ramp door for rear loading and retractable side ramps to allow for side loading of additional equipment, square-tube top, and side rails, enclosed LED lights, shielded wiring, and setback jack.
What would 2 ATVs on 6×12 Trailer Look Like?
This is what 2 ATVs on 6×12 trailer would look like:
Weight Requirements For a 6×12 Trailer
2 ATVs on 6×12 Trailer are expected to have an overall weight of 900-1000 pounds. If we are being specific, 967 pounds in weight with a carrying capacity of 2600 pounds.
How to Load 2 ATVs on 6X12 Trailer
The following steps should be taken when loading two ATVs on a 6×12 trailer:
- Ensure your trailer is parked on a level surface so it doesn’t shift when loading your ATVs.
- Ensure that you prevent your trailer from moving when you’re loading it by chocking the wheels of your trailer.
- Make sure that the weight is distributed properly. Since you have two ATVs, park the heavier one in front of the axle and the other behind.
- Next, tie down the ATVs thoroughly using strong straps.
- If you have lighter loads to carry asides the ATVs, put them on top.
- Hitch your trailer to the truck and test it to ensure everything has been properly fixed.
Specifications and Features of a 6X12 Trailer
The following are the specifications and features of a typical 6X12 ATV trailer:
- Trailer Weight: 967 lb.
- Carrying Capacity: 2600 lb.
- Overall Width: 96 inches.
- Overall Length: 192 inches.
- Bed Width: 74 inches.
- Bed Length: 144 inches.
- Tire Size: ST215/75D14C.
- Hitch Ball Size: 2 inches.
- Gross Vehicle Weight Rating: 2990 lb.
- Tailgate Height: 49 inches.
- Tailgate Capacity: 2023 lb.
- It has a Sure-Lube wheel bearing grease system that provides quick, clean lubrication for easy maintenance.
- It is easy to load from the side, allows for longer and wider loads, and is easily removable.
- It comes with a great spray technique that was used to ensure long-lasting protection from the elements.
- It has treated 2 x 6 inches wooden deck boards to protect against decay and termites.
- It is equipped with expanded metal to help load heavy equipment.
- It has coated self-coiled safety cables that coil out of the way when they are not used.
- It produces little or no noise due to its lockable tensioner latches and nylon bushing springs.
- It has a welded tubular steel frame and an A-frame tongue for easy handling.
Other Things you Need with a Trailer
The following is a list of some of the accessories you need with a trailer and their links:
RVMATE 7 Way 8 Feet Trailer Cord Kit
CURT 25080 Trailer Coupler Pin
RVGUARD 7 Way 8 Foot Trailer Cord
Malloryx 4' Breakaway Trailer Cable with Pin.
Safety Chain Hanger/Trailer Towing Hitch.
JOUNJIP 52" Magnetic Trailer Hitch Alignment Kit.
MICTUNING Heavy Duty 7 Way Plug Inline Trailer Cord
CircleCord 30 Amp to 50 Amp RV Adapter Cord
MaxxHaul 70205 Trailer Light Kit
2pc 7" Amber + Red LED Trailer Fender Light Set.
Questions to Consider Before Loading 2 ATVs on A Single-Axle 6×12 Trailer
There are a few points to consider or questions to ask yourself before you begin to load two ATVs on a 6×12 trailer:
- Are the tires of your trailer properly inflated and in good condition?
- Are your trailer brakes operating properly?
- Is your trailer properly leveled onto your vehicle?
- Are all the joints well welded? You have to be certain there aren’t any cracks on the joints.
- Is your coupler well connected to your hitch?
- Is the coupler engaging properly, or is it rusted or frozen?
If you own a Polaris ATV, check Polaris Starter Solenoid Wiring Diagram to understand your Polaris wiring better.
How Much Weight Can a 6×12 Trailer Hold?
Any 6×12 Utility Trailer has the capacity to carry just over 2,600 pounds and more than 70 square feet of floor space.
How Many Quads Will A 6×12 Trailer Haul?
A 6×12 trailer can haul two quads if you load them side by side or from nose to tail.
In conclusion, you will need to license your trailer. The trailer must come with a certificate of origin from the manufacturer when purchasing a new trailer. Requirements may vary by state, but the process is fairly straightforward.
This article on 2 ATVs on 6×12 trailer gives you detailed information on how many ATVs you can load on your trailer, the features, weight requirements, and many more.